NEC SV8100 Dterm User Guide
To use your phone, you will need to lift the handset to talk or press
SPEAKER to talk handsfree (see notes on page 6).
To make an external call
1. Dial 1 for an outside line
2. Dial the required number
To make an internal call
1. Dial the extension number, or press the displayed extension key
If the extension does not answer you may send a message wait
1. Press MW button below screen
If the extension is engaged you can
1. Press to CAMP button below screen to set an automatic
callback (N/A if called extension has voicemail)
This will allow you to call an extension and automatically talk on
speakerphone. The called party does not need to answer the call
but must have their MIC light on. They will hear an alert tone
first.
1. Dial the extension
2. Press VOICE (hear alert tone, may press RING to switch back)
3. Speak with the dialed party
When you call an extension that doesn’t answer, you may set a
message wait. This will make their feature light flash red.
To set a message wait
1. Dial an extension
2. Press MW button below screen
3. Hang up
To return a message wait
1. Press MW button below screen
2. Press CALL to ring the person back or CANCEL to clear
3. Once you finish this call, the message wait light will disappear
To Next Page
Loading...
