NEC SV8300 Administration Guide

Page 5 of 6
North American Telecommunications Group
For Service: 604-856-9155 / service@natgtelecom.com
Add/Delete/ or Change Mailboxes
1. From Ext 1001
2. When prompted enter your security code
press VOICEMAIL (**see note on Table of Contents)
3. On the display see MORE> press the soft key under that
4. On the display see MGR press key
5. On the display see SUBS … press key
6. The system will ask you to enter the mailbox… enter the box you want to add, delete or
change
7. At this point listen to the prompts to be guided through deleting the security code for the
box or deleting the box.
NOTE:
8. Press SPEAKER key when all done
if there is no mailbox the system will say:
“There is no mailbox.. would you like to add one?” Press 1 for Yes or 2 for No
Note: When you reset a security code for a mailbox, it will reset it back to 9155

NEC SV8300 Specifications

General

Brand	NEC
Model	SV8300
Category	Telephone
Language	English