NEC SV9100 - Web Conference Controls and Sharing; Managing Audio and Video Streams; Screen Sharing Functionality

Configuration Note 3. Configuring NEC SV9100 IP-PBX
Version 7.0 19 AudioCodes Mediant E-SBC
8. Route outgoing trunk digits to AudioCodes E-SBC in Programming command Easy
Edit> Advanced Items> VoIP> Networking> SIP Networking> Profile 1> SIP
Profile 1 – Networking Mode> SIP Profile 1 – Remote Destinations. The shown
configuration will route all dialed numbers to the SBC as dialed. IP address used is the
internal LAN interface of the E-SBC:
Figure 3-8: Easy Edit> Advanced Items> VoIP> Networking> SIP Networking> Profile 1> SIP
Profile 1 – Networking Mode> SIP Profile 1 – Remote Destinations
9. Optionally reduce the Enbloc inter-digit timer for outgoing calls in Programming
command Easy Edit> Timers:
Figure 3-9: Easy Edit> Timers