EasyManua.ls Logo

NEC SV9100 - Page 26

NEC SV9100
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AudioCodes Mediant E-SBC 26 Document #: LTRT-12490
SV9100 IP-PBX & BroadCloud SIP Trunk
a. Select the 'Index' radio button of the OAMP + Media + Control table row, and
then click Edit.
b. Configure the interface as follows:
Parameter Value
IP Address
192.168.100.15 (IP address of E-SBC)
Prefix Length
24 (subnet mask in bits for 255.255.255.0)
Default Gateway
192.168.100.254
VLAN ID
1
Interface Name
Voice (arbitrary descriptive name)
Primary DNS Server IP Address
192.168.100.254
Underlying Device
vlan 1
3. Add a network interface for the WAN side:
a. Enter 1, and then click Add Index.
b. Configure the interface as follows:
Parameter Value
Application Type
Media + Control
IP Address
82.153.203.53 (WAN IP address)
Prefix Length
25 (for 255.255.255.128)
Default Gateway
82.153.203.49 (router's IP address)
VLAN ID
2
Interface Name
WANSP
Primary DNS Server IP Address
82.153.203.49
Secondary DNS Server IP Address
8.8.8.8
Underlying Device
vlan 2
4. Click Apply, and then Done.
The configured IP network interfaces are shown below:
Figure 4-3: Configured Network Interfaces in IP Interfaces Table

Other manuals for NEC SV9100

Related product manuals