NEC SV9100 - Multi-Language Support; Supported Languages and Conditions

AudioCodes Mediant E-SBC 48 Document #: LTRT-12490
SV9100 IP-PBX & BroadCloud SIP Trunk
Figure 4-24: Configuring IP-to-IP Routing Rule for IP-PBX to ITSP – Action tab
4. To configure rule to route calls from BroadCloud SIP Trunk to IP-PBX:
a. Click Add.
b. Click the Rule tab, and then configure the parameters as follows:
Parameter Value
Index
2
Route Name
ITSP to IP-PBX (arbitrary descriptive
name)
Source IP Group
BroadCloud