NEC SV9100 - Page 59

Configuration Note 4. Configuring AudioCodes E-SBC
Version 7.0 59 AudioCodes Mediant E-SBC
6. Assign Manipulation Set ID 4 to the BroadCloud SIP trunk IP Group:
a. Open the IP Group Table page (Configuration tab > VoIP menu > VoIP
Network > IP Group Table).
b. Select the row of the BroadCloud SIP trunk IP Group, and then click Edit.
c. Click the SBC tab.
d. Set the 'Outbound Message Manipulation Set' field to 4.
Figure 4-36: Assigning Manipulation Set 4 to the BroadCloud SIP Trunk IP Group
e. Click Submit.