EasyManuals Logo

NEC SV9100 User Reference Guide

NEC SV9100
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Station Camp -On
If you have tried calling an
extension and the line is busy, dial
# then hang up the handset.
Your handset will then
automatically call you back
when that extension becomes
free. Once you answer the call,
the system will dial the extension
you were trying to contact.
Tone Override
When calling a busy extension
Dial * to send a tone to the busy party.
Receiving party will see a red flash on their
handset and will receive a tone through
their external speaker.
The receiving party can place current call
on hold and speak with 2
nd
party.
ADVANCED FEATURES
11
Do Not Disturb
Set
Press Speaker key
Dial 747 followed by 3
DND ALL will be displayed
on your phone
Press Speaker key to exit
Cancel
Dial 747 followed by 0
Enable / Disable Hands free Intercom
Press Speaker key
Dial 721
Press Speaker key to exit
To enable Ringing Intercom
Press Speaker key
Dial 723
Press Speaker key to exit
12
To Change your ring tone
Press Speaker key
Dial 720
Dial 1 for internal calls or 2 for External
Calls
Enter your new ring tone from 1-8
Press Speaker to exit & save

Other manuals for NEC SV9100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC SV9100 and is the answer not in the manual?

NEC SV9100 Specifications

General IconGeneral
Unified MessagingYes
VoIP SupportYes
SIP SupportYes
VoIP ProtocolsSIP, H.323
MobilityYes
TypeIP-PBX
Power SupplyAC 100-240V, 50/60Hz
Operating Temperature0°C to 40°C (32°F to 104°F)
Humidity10% to 90% (non-condensing)
System TypeHybrid (Supports Analog, Digital, and IP)

Related product manuals