Chapter 16 Wireless System
Page 16-16 UNIVERGE NEAX 2000 IPS
Request for Proposal (RFP) Reference Guide
Issue 6
WCS Required Equipment
EQUIPMENT DESCRIPTION QTY REMARKS
PZ-PW122
(DC/DC PWR)
–48V Power supply card for ZT
One per PIM
16 ZT powered/card
1-8
PN-4CSIA-A (CSI) ZT Interface card
4 per PIM
1-32
PN-SC03-B (CSH) ZT Handler card
1 per 2 4CSIA cards
1-16
PN-4COT
PN-8COT
COT for Analog Interface
4COT: 4 PS per card
8COT: 8 PS per card
4COT: 64
8COT:32
SPN-24CCTA 1.5M AMI (24ch) CCIS Interface Trunk As req.
Max. 8 per sys
Analog Interface
CCIS Interface
Wired for Wireless
PN-24DTA-C(24DTI) 24-channel DTI card 1-8
PN-30DTC-C (30DTI) 30-channel DTI card 1-8
PN-SC01 (DCH) D-channel Handler card 1-8
PN-AP00-B (DBM) Roaming Data Base Module card 1
For Multi-Site
Roaming Note
PZ-M606-A (ETHER) Ethernet Control card 1
PN-32IPLA (IP-PAD) 32-channel IP-PAD card 1-8
PN-16VCTA (16VCT) 16-channel CODEC card 1-16
IPTRK BUS CA Set of 3 BUS Cables between IP-PAD
and 16VCT cards
Length: 0.1 m (0.33 ft.)
1-8 sets
PN-8IPLA (IP-PAD) 8-channel IP-PAD card 1-8
PN-24IPLA (24DSP) 24-channel expansion DSP card for 8-
channel IP-PAD card
1-8
For Q931a Roaming
over IP Trunk
(Virtual IPT)
Note: The SPN-AP00B DBM-C is required when accommodating 257 or more PSs.
To Next Page
Loading...
