35
CONFERENCE
1. Establish an intercom or trunk call.
2. Press Conf or Conference softkey (Service Code
751:07).
3. Dial the extension you want to add.
-OR-
Access an outside call.
Note:
To get the outside call, you can either press a
Line key or dial a trunk/trunk group access
code.
4. When the called party answers, press the Add
softkey or Conf twice.
Note:
If you cannot add additional parties to your
conference, you have exceeded the system’s
Conference limit.
5. Repeat steps 2~4 above to add more parties.
CALL PARK – SYSTEM
To Park a call in a system orbit:
Note:
You can Park intercom or trunk calls.
1. Press the Park key (Service Code 752: *04 + orbit).
Note:
The Park key LED lights.
2. Use Paging to announce the call.
3. Press the Speaker key to hang up.
Note:
If not picked up, the call will recall you.
-OR-
1. Press the Transfer key.
2. Dial #6 and the Park orbit (01~64).
Note:
If you hear a busy tone, the orbit is busy. Try
another orbit.
3. Use Paging to announce the call.
4. Press the Speaker key to hang up.
Note:
If not picked up, the call will recall you.
To Next Page
Loading...
