NEC Univerge SV8100 DT310 - Selectable Display Messaging

47
To cancel Call Forward – Both Ring at a forwarding
station:
1. Pick up the handset or press the Speaker key.
2. Dial the Call Forward – Both Ring Service Code
(default: 745).
-OR-
Press the Call Forwarding Programmable
Function Key (Service Code 751:14).
3. Dial 0 (Cancel).
4. Press the Speaker key or hang up.
SELECTABLE DISPLAY
MESSAGING
To select a message:
1. Press the Speaker key.
2. Press the Text Message key (Service Code 751:18
+ 01~20).
3. Use VOL UP or VOL DOWN keys to scroll through
the messages.
4. For messages 1~8 and 10, enter digits to append
the message, if needed.
Note:
You can append messages 1~8 and 10 with
digits (e.g. the time when you get back). You
enter the time in 24-hour format.
5. Press Speaker to hang up.
Note:
Intercom calls to extensions with Selectable
Display Messaging set will receive a DND
signal and receive the display message on
their telephone’s display instead of ringing
the display.
12345678
CF-Both Ring
STA 12345678
IN MEETING UNTIL 08:48
List Dir ICM Prog
No. Message Change “#” to:
1 IN MEETING UNTIL ##:##
Time (when meeting is
done)
2 MEETING ROOM - #######
Room name or
extension
3 COME BACK ##:## Time (when returning)
4 PLEASE CALL ########### 11 digits (Tel. No.)
5 BUSY CALL AFTER ##:## Time (when returning)
6 OUT FOR LUNCH BACK ##:## Time (when returning)
7 BUSINESS TRIP BACK ##:## Date (when returning)
8 BUSINESS TRIP ##########
10 digits (where
reached)
9 GONE FOR THE DAY
10 ON VACATION UNTIL ##:## Date (when returning)
11~20 MESSAGE 11~20