NEC Univerge SV8100 DT310 - Making Calls from Directory

63
Make a Call From Directory
STEP 1: Display the detailed data for a target party
(see Find Registered Data).
The following display is an example of dial by name.
STEP 2: Lift the Handset, press Speaker or press the
Dial softkey while displaying the detailed data
for target party on LCD.
Note:
If multiple telephone numbers are assigned
into a target party, a call is made to the first
telephone number.
Delete All Directory Data
STEP 1: Display the main directory screen.
STEP 2: To delete all the registered data, press the
Enter Key or 4: Softkey to delete all the data.
Below is a sample display of a deleted
number.
STEP 3: After 4-digit password is entered (Default =
0000), the display asks if you want to delete
all the Directory data. To delete, press Yes.
STEP 4: After the appropriate Directory data is
deleted, the display changes as follows:
Name:Abe Shintaro
[Detail]
Name:Abe Shintaro
[Detail]
Name:Abe Shintaro
[Detail]
Name:Abe Shintaro
[Detail]
Name:Abe Shintaro
[Detail]