41
To cancel Repeat Redial:
1. Press the Feature key.
2. Press the Redial key.
-OR-
Press the Repeat Redial key (Service Code 751:29).
Caller ID
Answer
Receive incoming ringing or a transferred outside call:
1. Review the telephone display for the calling party’s
name or number.
2. Answer the call accordingly.
Temporary Memory
An unanswered call will cause the Call History key
(Service Code 751:08) to flash, indicating a new call
has been placed in the temporary memory. If enabled
in programming, the telephone’s display will show:
“Check List”.
1. Press the Call History key (Service Code 751:08)
or press the LIST Softkey and CID.
Note:
The last addition to the list is displayed.
2. Press the Arrow Down Softkey to scroll through the
list of numbers in memory.
3. Press the DEL Softkey to delete the entry and scroll
to the next entry.
4. The Call History key will remain on as long as
entries remain in memory.
5. To place a call back to a number in the temporary
memory list, with the number to be dialed
displayed, press a Line or the Speaker key.
Note:
The outgoing call is placed.
To Next Page
Loading...
