NEC Univerge SV9100 - Page 92

78
1.
(4) Select Protocol.
Select an item by one of the following operations.
❍ Highlight an item by using , and press ,
or OK.
❍ Press .
(5) Choose a protocol used by the server which
stores the backup file.
Select an item by one of the following operations.
❍ Highlight an item by using , and press or
OK.
❍ Press , or , and press or OK.
(6) The display returns to the Backup/Restore
screen.
If FTP is selected, continue with
STEP 7.
If TFTP is selected, proceed to
STEP 15.
If HTTPS is selected, proceed to
STEP 7.
(7) Select Account Settings.
Select an item by one of the following operations.
❍ Highlight an item by using , and press ,
or OK.
❍ Press .
(8) Select User ID.
Select an item by one of the following operations.
❍ Highlight an item by using , and press ,
or OK.
❍ Press .
4
4
1
2
3
1
2
3
5
5
1
1