Chapter 3 REMOTE UNIT OVER IP FEATURES
3-38 NWA-088654-001 Rev.1.0
94ch3001.fm
ISDN ALTERNATIVE ROUTING IN REMOTE UNIT SURVIVAL MODE
DESCRIPTION DATA
Assign the destination of ISDN Alternative
Routing method to the required tenants.
NOTE: When the second data is set to “0”
and CME6 Y=51 is set to “NONE”,
this command operates as well as
second data is set to “1”.
•
(1)
(2)
Y=12
00-63: Tenant No. of Terminating Unit as-
signed by CM12 Y=04
0 : Destination station No. of each station
1 : Destination station No. of each tenant
2 : Destination station No. of each tenant
+ Subaddress
3 : ISDN Alternative Routing disabled
Assign the destination of each tenant for ISDN
Alternative Routing in Remote Unit survival
mode if the 2nd data of CM64 Y=12 is set to 1/
2.
•
(1)
(2)
Y=13
00-63: Tenant No. of Terminating Unit as-
signed by CM12 Y=04
X-XXXX: Destination C.O. line number
(Maximum 26 digits)
NONE : No data
Assign the destination of each station for ISDN
Alternative Routing in Remote Unit survival
mode if the 2nd data of CM64 Y=12 is set to 0.
NOTE 1: When the system operates both
CME6 Y=50 and CME6 Y=51, set
the same number of the second data
of CME6 Y=50 as the second data.
NOTE 2: When the second data of CM64
Y=12 is set to “0”, the destination is
set by this command.
•
(1)
(2)
Y=51
X-XXXXXXXX: Station No.
X-XXXX: Destination C.O. line number
(Maximum 26 digits)
NONE : No data
To Next Page
Loading...
