NEC V302X - Options: Standby Mode Settings; Options: Direct Power On

75
... English
User Controls
SCREENIMAGE SETTING OPTIONS
INFORMATION ADVANCED
STANDBY MODE
DIRECT POWER ON
AUTO POWER OFF (MIN)
OFF TIMER (MIN)
CONTROL PANEL LOCK
NORMAL
COMPUTER
SELECT EXIT MOVE MOVE
OFF
OFF
CONTROL ID
STANDBY MODE

NETWORK STANDBY: Choose “NETWORK STANDBY” to
save power dissipation further < 0.5W.

NORMAL: Choose “NORMAL” to return to normal standby.
STANDBY MODE
NORMAL
NETWORK STANDBY
DIRECT POWER ON
Choose “ON” to activate Direct Power mode. The projector will
automatically power on when AC power is supplied, without
pressing the button on the projector control panel or the
POWER ON button on the remote control.
DIRECT POWER ON
OFF
ON
Network Standby
mode will disable
the following
connectors, buttons
or functions when
the projector is in
standby:
- AUDIO OUT
connector
- LAN and Mail
Alert functions
- Buttons other than
POWER button on
the cabinet
- Buttons other than
POWER ON button
on the remote
control
- PC Control
connector
- Virtual Remote
Tool, PC Control
Utility Pro 4/PC
Control Utility
Pro 5.
OPTIONS |
ADVANCED