Need help?Do you have a question about the NEC V302X and is the answer not in the manual?
General| Native aspect ratio | 4:3 |
|---|---|
| Projection distance | 1.2 - 13 m |
| Vertical scan range | 50 - 120 Hz |
| Horizontal scan range | 15 - 100 kHz |
| Projection technology | DLP |
| Supported aspect ratios | 4:3, 16:9 |
| Contrast ratio (typical) | 10000:1 |
| Screen size compatibility | 30 - 300 \ |
| Projector native resolution | XGA (1024x768) |
| Keystone correction, vertical | -40 - 40 ° |
| Focus | Manual |
| Offset | 65 % |
| Throw ratio | 1.95 - 2.15:1 |
| Zoom capability | Yes |
| Focal length range | - mm |
| Lamp power | 195 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 4500 h |
| Service life of light source (economic mode) | 6000 h |
| Analog signal format system | NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM |
| Supported graphics resolutions | 1024 x 768 (XGA), 1920 x 1080 (HD 1080) |
| DVI port | No |
| Composite video in | 0 |
| USB connector type | Mini-USB |
| HDMI connector type | Full-size |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | 1 |
| Maximum digital resolution | 1920 x 1080 pixels |
| Noise level | 34 dB |
| Preset modes | Cinema, Presentation, sRGB |
| Certification | CE; ErP; TÜV GS |
| Noise level (economic mode) | 30 dB |
| RMS rated power | 8 W |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | White |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 237 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (economy mode) | 198 W |
| Power consumption (network standby) | 3 W |
| Sustainability certificates | RoHS |
| Cables included | AC, VGA |
| Remote control type | IR |
Weight and Dimensions| Depth | 250 mm |
|---|---|
| Width | 324 mm |
| Height | 88 mm |
| Weight | 2700 g |
General safety warnings and precautions for using the projector.
Information regarding FCC compliance and radio frequency interference.
Key safety instructions to ensure projector longevity and prevent hazards.
Precautions related to fire hazards and electrical shock.
Guidelines for safe and proper handling of the remote control.
Information on replacing the projector lamp and its characteristics.
Health advice for users viewing 3D images with the projector.
Instructions for using the projector at high altitudes.
Description of the projector's power-saving functions.
Essential precautions and best practices for operating the projector.
Highlights of the projector's key features and capabilities.
List of items included in the projector package.
Detailed description of all available input and output ports.
Diagram and identification of the projector's control panel buttons.
Explanation of each button's function on the control panel.
Diagram and identification of the remote control buttons.
Explanation of each button's function on the remote control.
Behavior of quick keys on the control panel and remote.
Instructions for installing batteries in the remote control.
Guide to using the Virtual Remote Tool for projector control.
Step-by-step instructions for installing the Virtual Remote Tool.
Procedure for uninstalling the Virtual Remote Tool software.
Steps to connect the projector to a local area network.
How to launch and start using the Virtual Remote Tool.
Instructions on how to close the Virtual Remote Tool application.
How to access the help documentation for Virtual Remote Tool.
Using PC Control Utility Pro for LAN-based projector control.
Steps for installing the PC Control Utility Pro 4 software.
Procedure for uninstalling the PC Control Utility Pro 4 software.
How to launch and start using the PC Control Utility Pro 4.
How to access the help documentation for PC Control Utility Pro 4.
Steps for installing PC Control Utility Pro 5 on Mac OS.
How to access the help documentation for PC Control Utility Pro 5.
Procedure for uninstalling PC Control Utility Pro 5 software.
Instructions and precautions for viewing 3D content.
Steps to connect the projector to a computer or notebook.
Instructions for connecting various video sources to the projector.
Procedure for turning the projector on.
Procedure for turning the projector off.
Explanation of projector status and warning indicator lights.
How to adjust the projector's height using the tilt feet.
Steps for adjusting the image focus and zoom level.
Table and guide for adjusting projection image size and distance.
How to navigate and use the projector's On Screen Display (OSD).
Overview of the projector's menu system hierarchy.
Selecting and adjusting picture modes for optimal image quality.
Adjusting color settings based on the wall color.
Adjusting the overall brightness of the projected image.
Adjusting the contrast level for image depth.
Adjusting the sharpness of the projected image.
Adjusting color saturation for video images.
Adjusting the color balance of red and green.
Selecting gamma tables for fine-tuning image quality.
Adjusting color processing for enhanced brightness and vibrancy.
Adjusting color temperature for cooler or warmer screen appearance.
Enabling dynamic contrast for optimal contrast ratio.
Adjusting individual color gains (Red, Green, Blue).
Adjusting Magenta/Yellow gain and color bias settings.
Resetting color adjustments to factory defaults.
Selecting the appropriate color matrix type (AUTO, RGB, YUV).
Choosing the desired aspect ratio for the projected image.
Removing video noise from the edges of the image.
Adjusting image distortion for trapezoidal or rectangular display.
Enabling and configuring 3D display modes.
Selecting the correct 3D format for displaying content.
Choosing the preferred language for the OSD menu.
Adjusting projector image orientation (Desktop/Ceiling, Front/Rear).
Configuring settings for HDMI/MHL inputs.
Selecting audio sources and enabling/disabling mute function.
Adjusting the projector's speaker volume.
Synchronizing signal timing for unstable or flickering images.
Matching display data frequency to computer's graphics card.
Adjusting the horizontal position of the projected image.
Adjusting the vertical position of the projected image.
Enabling or disabling the startup screen (NEC logo).
Enabling closed caption and selecting caption options.
Configuring security verification for turning the projector on.
Displaying a test pattern for image calibration.
Setting usage time limits for the projector.
Procedure for changing the projector's security password.
Configuring network connection status and DHCP settings.
Manually setting the projector's IP address.
Configuring network subnet mask and default gateway.
Guide to controlling the projector using a web browser interface.
Using the web interface to monitor and control projector status.
Detailed steps for configuring network settings via web interface.
Configuring proxy server settings for network access.
Final steps to establish and use web browser control.
Enabling or disabling automatic input signal searching.
Enabling or disabling specific input sources.
Selecting fan mode (Auto or High Altitude).
Hiding or showing information messages on screen.
Enabling or disabling the display of the projector's ID number.
Setting the background screen color when no signal is available.
Resetting all projector settings to factory defaults.
Displaying the remaining life of the projector lamp.
Displaying the total operating hours of the projector lamp.
Selecting Eco Mode to reduce power consumption and extend lamp life.
Enabling or disabling warnings for lamp replacement.
Resetting the lamp usage hour counter after replacement.
Displaying model number, serial number, and software version.
Configuring standby mode for power saving or network control.
Enabling direct power on when AC power is supplied.
Setting an automatic power-off timer when no signal is detected.
Locking the projector's control panel to prevent unauthorized use.
Configuring the projector's control ID for remote management.
Steps to resolve issues with no image appearing on screen.
Resolving partial, scrolling, or incorrect image display.
Resolving issues where notebook screens are not displaying presentations.
Correcting unstable images or flickering issues.
Steps to resolve issues with the projected image being out of focus.
Resolving stretched images when displaying 16:9 content.
Correcting issues with the projected image being reversed.
Interpreting and troubleshooting Power LED indicator status.
Interpreting and troubleshooting Status LED indicator status.
Interpreting and troubleshooting Lamp LED indicator status.
Resolving issues related to projector over-temperature warnings.
Addressing lamp life warnings and replacement procedures.
Step-by-step guide for replacing the projector lamp module.
Procedure for cleaning dust or blemishes from the projection lens.
Technical specifications for the projector's optical components.
Technical specifications related to the projector's electrical properties.
Mechanical dimensions and weight specifications of the projector.
Environmental operating conditions and regulatory compliance.
Supported VGA analog signal resolutions and frequencies.
Supported extended wide VGA analog resolutions and frequencies.
Supported VGA analog component signal resolutions and frequencies.
Supported HDMI digital signal resolutions and refresh rates.
Supported HDMI 3D signal timing specifications.
Supported MHL signal resolutions and aspect ratios.
Instructions for installing the projector using a ceiling mount kit.
Detailed dimensions of the projector's cabinet.
Pin assignment details for the D-Sub computer input connector.
List of PC control codes for projector management.
Information on connecting the projector via PC control cable.
A checklist to help diagnose and solve common projector problems.
To Next Page
