On-Screen Menu Programming
The i button on the remote control can be used to activate the menu on the TV screen.
Set-up Menu Display
13
1
2
Press i on the remote control. The following menu will appear on the TV screen.
Press CURSOR (
FF
/
GG
) to select the desired menu and press OK.
(1) REC
This function is used to record a programme with the timer (see p 33 to 37).
(2) PR SET
This function is used to view stored TV stations or to set TV station information
manually (see p 16 to 18).
(3) ACMS
This feature is used for automatic setting of the TV stations (see p 19 to 20).
(4) TIME DATE
This function is used to set the clock and date manually (see p 14 to 15).
(5) SYSTEM
This function is used to set the Colour TV System (see p 32).
(6) Dr.
This feature is used to check a problem with your VCR (see p 28).
(7) ABC OSD
This function is used to select the language.
● Press
DD
/
EE
to select from English, Deutsch, Français, Polish and Russian or
vice versa.
(8) OSD ON/OFF
This feature is used to display VCR operation modes on the TV screen.
● Press
DD
/
EE
to select it ON or OFF.
(9) OPR
This function is used to improve the playback picture (see p 24).
(Please note you may only see OPR when playing a tape.)
To Next Page
Loading...