Remote Control Unit
Almost all VCR functions can be controlled from the wireless remote control unit. The remote control must have line of
sight to the remote sensor on the front panel of the VCR and must be within an angle of 30 degrees either side of it.
The maximum operating distance is about 7.5 m (25 feet). If the operating distance decreases, the remote control may
need new batteries.
7
BATTERY REPLACEMENT
● Remove the battery compartment lid by sliding
it forward.
● Remove the flat batteries.
● Load new AAA batteries, taking care to align
their polarities ( and ) as indicated.
● Replace the lid.
NOTE:
If you do not intend using the remote control unit
for an extended period of time, remove the
batteries and store them in a cool, dry place.