30
Recording TV Programmes
● Make sure that the timer recording indicator TIMER is OFF. If the indicator appears on the Multi-Function Display,
press OPERATE once to turn it off.
● Check that the safety tab on the cassette is in place. If it has been removed, recording will not start. Full Auto
Play will take over instead.
● Turn the TV on and set the TV channel to VCR output channel 68.
1
Insert the video cassette.
● The cassette-in indicator will appear on the Multi-Function Display.
● The Multi-Function Display will light up and the channel position, number and
the clock indicator will also appear.
Select the desired channel by pressing CURSOR (
DD
/
EE
).
When recording from another source via AUDIO IN, VIDEO IN in the rear panel
(AV1), select AV mode with AV button. The AV indicator AV will appear on the
Multi-Function Display and AV will appear on the TV screen.
NOTE: Press AV to select TUNER mode, if you need to record from TUNER mode.
Press REC/QSR to start video and audio recording.
The recording indicator REC will appear on the Multi-Function Display. RECORD
will also appear on the TV screen briefly.
4
To Next Page
Loading...