2
Press CURSOR (
FF
/
GG
) to select “ACMS” and press OK.
NOTE: This will delete all previous programmed channels before storing
the new channels.
Auto Channel Tuning
Important: This VCR has the following channels preset when it is shipped from the factory.
It must be noted that by entering the Auto Channel Tuning mode (ACMS), all factory preset channels
and manually stored channels will be automatically erased, therefore, if you wish to add any channels
to the factory preset channels, refer to the manual channel tuning section.
Channel Indication 1 2 3 4 5 6 7 8 9 10 11-27 28
Channel Number - 2 - - - - 7 - 9 10 - 28
To Next Page
Loading...