NEC Display Solutions of America, Inc.
VT49 Installation Guide
Ceiling Mounted and Desktop Rev 1.2
www.necdisplay.com VT49 Page 1 of 6
Contents
Product Description, Lens Specs, Notes and Formulas Pg 1
Diagrams & Distance Charts
Pg 2
Cabinet Dimensions
Pg 3-4
Ceiling Mount Dimensions
Pg 5
Input Panel and Control Codes
Pg 6
Product Description
Type: 3 panel LCD projector, Brightness: 1600 ANSI Lumens
0.6” p-Si TFT w/MLA Dimensions: 12.1”(W) x 10.2”(H) x 4.4”(D)
Resolution: 800 x 600 Weight: 6.17 lbs
Fan Noise: 32 dB / 25dB @ 1 meter
Power Consumption: 205W (max) BTU’s: 699 BTU/hour
Lens Specifications
Throw Ratio: 1.8:1 (for 100” diagonal) Focal Length: 22.4 mm
Offset Angle: 8.4° (for 100” diagonal) F/#: 1.70
Screen Sizes: 25” - 300” diagonal (4:3) Manual Focus/Electronic Zoom
Notes
For screen sizes not indicated on the projection tables, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
• All calculations are based on 4:3 aspect ratio.
• Distances are in inches, for millimeters multiply by 25.4.
• Distances may vary ±5%.
Formulas
The Projection Formulas use the image width for calculation. For proper projection placement, determine the image width
for the desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plug in the width for “W” in
the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2:
Definitions: 4:3 Screen Formulas:
W = Image Width W = H x 4/3
H = Image Height (size) H = W x 3/4
B = Vertical distance between lens center and screen center Screen Diagonal = W x 5/4
C = Throw distance
D = Vertical distance between lens center and screen top
(screen bottom for desktop application)
Projection Formulas:
B = 0.266W
C = 1.813W-0.919
D = 0.108W
α = tan¯¹ (B/C)
To Next Page
Need help?
General
