NEC VT695 - Page 12

02H = Viewer displaying
03H = Test pattern displaying
04H = LAN displaying
DATA86 .. 128 Reserved
Response: At the time of a failure
A0H C0H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
(!)
Selected input terminal DATA07 DATA08
RGB or RGB1 (*5) 1 (01H) RGB (01H)
RGB2 (*5) 2 (02H) RGB (01H)
Video 1 (01H) VIDEO (02H)
S-Video 1 (01H) S-VIDEO (03H)
Component 1 (01H) COMPONENT (04H)
Component 2 (02H) COMPONENT (04H)
Component 3 (03H) COMPONENT (04H)
DVI or DVI(DIGITAL) (*6) 1 (01H) DIGITAL (06H)
Viewer 1 (01H) VIEWER (07H)
LAN 2 (02H) VIEWER (07H)
Slot1-1 1 (01H) SLOT1 (08H)
Slot1-2 2 (02H) SLOT1 (08H)
Slot2-1 1 (01H) SLOT2 (09H)
Slot2-2 2 (02H) SLOT2 (09H)
RGB(Video) 2 (02H) VIDEO (02H)
RGB(S-Video 2 (02H) S-VIDEO (03H)
009. ERROR STATUS REQUEST
**********************************************************************
Function:
This command acquires the error information occurring with the projector.
Command:
00H 88H 00H 00H 00H 88H
Response: At the time of a success
20H 88H 01H xxH 0CH DATA01 .. DATA12 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
* The various bits are normal is "0" and error is "1".
* "None" is "0" fixation.
DATA01 Error Status (1)
bit0 : Lamp cover error
bit1 : Temperature error(Bimetal)
bit2 : None
bit3 : None
bit4 : Fan error
bit5 : Power error