NEC XN120 - Page 16

Features
Features Manual
14
n Operation
To set the alarm:
1. At system phone, press a SPK key.
OR
At single line set, lift handset.
2. Dial 827.
3. Dial alarm type (1 or 2).
Alarm 1 sounds only once. Alarm 2 sounds each day at the preset time.
4. Dial the alarm time (24-hour clock).
For example, for 1:15 PM dial 1315.
A confirmation tone will be heard if the alarm has been set. If the alarm was not set, an error tone will be heard
instead.
5. At system phone, press SPK to hang up.
OR
At single line set, hang up.
To silence an alarm:
1. At system phone, press CLEAR.
OR
At single line set, lift handset.
The single line set user will hear Music on Hold when the handset is lifted.
To check the programmed alarm time:
1. Press CHECK.
2. Dial 827.
3. Dial alarm type (1 or 2).
The programmed time displays.
4. Press CLEAR.
To cancel an alarm:
1. At system phone, press a SPK key.
OR
At single line set, lift handset.
2. Dial 827.
3. Dial alarm type (1 or 2).
4. Dial 9999.
5. At system phone, press SPK to hang up.
OR
At single line set, hang up.