NEC XN120 - User Manual

This guide explains the installation, configuration and operation of the XN120 Expansion Unit
including the exchange line and telephone connections.
Further information will be supplied with any optional equipment that you have purchased.
Please keep all information supplied for future reference.
Regulatory Notice.
Refer to the Getting Started Guide (991409-5) supplied with the XN120 Main Unit for the Declaration
of Conformity related to the product.
Warning: This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
XN120
Expansion Unit Guide
Rev 1.0 (January 2005)
991443-5

NEC XN120 Specifications

General

Speakerphone	Yes
Headset Port	Yes
Speed Dial	Yes
Volume Control	Yes
Handset	Yes
Wall Mountable	Yes
Lines	2
Compatibility	NEC Phone Systems

Summary

Installation Procedure

4- Connecting the Expansion Units to the EXIFU card

5- Connect the Telephones

6- Connect the Exchange Lines

7- Connect the Power & System Start Up

8- Ports Assigned

9- Test the System

11- Configure the XN120

Telephone Ringing Assignment.

Program 22-04-01

Program 20-07-01

Assign a key to each mode

Outgoing Exchange Line Access

Program 15-06-01

Assigns a Trunk Access Map (TAM) number to each telephone.

Program 14-07-01

Sets access properties for exchange lines based on TAM numbers.

Caller ID

Program 14-02-10

Program 15-03-09

Department Groups

Program 16-02-01

Program 16-01-02

Program 16-01-04

Program 16-01-09

Program 11-07-01

Create an Internal Paging Group

Program 31-02-01

12- Power Fail Options

Power Fail Options when the 64 Button Console is also Installed