NEC XN120 - Program 11-07-01

Configure the Expansion Unit
XN120 Expansion Unit Guide 37
Program 11-07-01
Give the department group a
pilot number.
Try to use a number that is
easy to remember.
For example use:
Pilot number 501 for group 1
Pilot number 502 for group 2
etc.
Default Setting:
There are no pilot numbers assigned.
Ø For each group enter the pilot number (3 digits required) you
will dial to reach the group.
Ø Press HOLD to confirm the entry and step to the next group.
If you duplicate a number you will see Duplicate Data, the
entry will be removed and you can enter a new number.
Ø Press DC several times when you are done to return to the
Program Mode.
Ø (Press SPK to save changes and exit if you are finished).
See Also:
There are no related settings.
Configuration Sheet: Department Groups
With defaults shown.
Telephone
number
Department
Group
number
16-02-01
default=1
Priority
number
16-02-02
Department
Group
number
1-32
Pilot
Number
11-07-01
Ring order,
priority/random
16-01-02
default=0 Priority
Try once or
continually
16-01-04
default=0 Once
Ring time
before step on
16-01-09
default=15 seconds
There are 32 groups available, only 8 are listed, as this is usually sufficient.
11-07-01 TEL Gr1
Ext Gr
p
No.
_
Press Vol p q
to select the
group number