Necchi K121A - Using the Needle Threader (Depends on Models)

13
Using the needle threader (depends on models)
n
Attention
Turn the power switch to off ("O").
Lower the presser foot lifter. Raise the
needle to its hightest position by turning the
handwheel toward you until the mark matched
with the line on the machine.
1
Mark
2
Line on the machine
1
2
Press down the needle threader as far as it
goes.
The needle threader turns automatically to the
threading position and the hook pin passes
through the needle eye.
1
Hook pin
2
Needle
Take the thread in front of the needle and
make sure it is under the hook pin.
1
Hook pin
Hold the thread loosely and release the lever
slowly. The hook turns and passes the thread
through the needle eye forming a loop.
Pull the thread through the needle eye.
Press down the needle threader for a certain
distance and cross the thread over the thread
guide.
1
Thread guide
1
1
2
1
1