Necchi K121A - Straight Stitch; Changing the Needle Position

21
Straight stitch
Using the all purpose foot.
If the machine has no stitch width dial
function, use the pattern selector dial to adjust
the needle position.
v
Changing the needle position
The needle position for straight stitches can
be changed by adjusting the stitch width.
The "0" is the center and "5" is full left needle
position.
v
Adjusting the stitch length
Turn the stitch length dial, and the length of
the individual stitches will decrease as the dial
approaches "0". The length of the individual
stitches will increase as the dial approaches
"4".
Generally speaking, the thicker the fabric,
thread and needle, the longer the stitch
should be.