26
v
Sewing corners
Stop the sewing machine when you reach a
corner.
Lower the needle into the fabric. Raise the
presser foot. Use the needle as a pivot and
turn the fabric 90°.
1
v
Sewing thin fabrics
When sewing thin fabrics, the stitches may
become misaligned or the fabric may not feed
correctly. If this occurs, place thin paper or
stabilizer material under the fabric and sew it
together with the fabric.
When you have nished sewing, tear off any
excess paper.
Stabilizer material or paper
v
Sewing stretch fabrics
Baste the pieces of fabric together, and then
sew without stretching the fabric.
Basting
Lower the presser foot and resume sewing.
1
1
v
Sewing heavy fabric
You can place cardboard or thick fabric with
the same thickness at the back of the seam.
Or support the presser foot while feeding by
hand and sewing toward the folded side.
Cardboard or thick fabric
To Next Page
Loading...
