Necta Korinto Espresso User Manual

L
OADING
R
EGULAR CLEANING
R
EGULAR CLEANING
C LEANING / L OADING
1 2
Loading products:
• Open the dispenser door (A).
• Lift the upper lid (B).
Loading products:
• Open the instant powder container’s lid.
• Load the product in (A), taking care not to compact the instant
powder.
• Load container (B) with coffee beans.
1 2
Emptying the liquid waste tray:
• Take hold of the sides of the liquid waste tray (A) firmly, then lift
slightly and pull forward.
• Empty the tray and if necessary, wash it using a mild detergent
solution.
• Re-fit the tray back into position.
3 4
Emptying the solid waste tray:
When the “W
ASTE TRAY FULL ” message appears on the display, the
solid and liquid waste trays require emptying.
• Take hold of the sides of the liquid waste tray firmly. Lift and pull.
• Remove the solid waste tray (A) and empty it.
• Fit both the solid and the liquid waste trays back into position.
Rinsing the mixer:
• With the door closed, press and hold the last selection button for
3 seconds.
• When “Password” appears on the display.
Enter 5 digit password for rinse function.
The mixer rinsing cycle must be carried out regularly or after
loading the instant powder.
KORINTO ESPRESSO
A
B
B
A
ON
ON
ON
Emptying the liquid waste tray:
When the red float signal lifts up through the grille, it is necessary to
empty the liquid waste tray immediately. The dispenser will then work
normally. It is advisable not to wait until the red drip tray full indi-
cator is visible. It is recommended that the liquid waste tray is
emptied regularly.
W ASTE
TRAY FULL
A
A

Necta Korinto Espresso Specifications

General

Brand	Necta
Model	Korinto Espresso
Category	Coffee Maker
Language	English