Necta Korinto Espresso User Manual

C LEANING THE MILK CIRCUIT
1 2
• At power-on and during a mixer rinse the machine proposes the
steps to be carried out for washing the milk circuit.
• It may be useful to place a container under the spouts for collect-
ing the liquid residue from washing.
• Take the priming tube out of the fresh milk container.
• Press the confirmation button to continue.
L
C
E
N
A
R
E
3
L
C
E
N
A
R
E
4
• Insert the priming tube in a container with a detergent solution.
• Press twice the confirmation button to start the cleaning cycle.
• Take the priming tube out of the container with the solution used.
• Press the confirmation button to continue.
A
W
T
R
E
5
T
R
E
A
W
6
• Insert the priming tube in un container with clean water.
• Press twice the confirmation button to start the rinse cycle.
• Replace the priming tube in the fresh milk container.
• Press the confirmation button to complete.
• Empty out all washing residue from the liquid waste container.
CAPPUCCINATORE
C
LEANING OF THE MILK CIRCUIT MUST BE CARRIED
OUT AT THE END OF USE
.
D O NOT USE DETERGENTS THAT ARE
TOO SCENTED
.
R INSING MUST ALWAYS BE CARRIED OUT
AT THE END OF THE CLEANING CYCLE
.
REMOVE MILK
CONFIRM?
INSERT DETERGENT
CONFIRM?
DETERGENT CYCLE
CONFIRM?
REMOVE DETERGENT
CONFIRM?
INSERT WATER
CONFIRM?
INSERT MILK
CONFIRM?
CLEAN CYCLE
CONFIRM?

Necta Korinto Espresso Specifications

General

Brand	Necta
Model	Korinto Espresso
Category	Coffee Maker
Language	English