Necta Korinto Espresso - Milker Nozzle Cleaning; Milker Nozzle Disassembly; Milker Nozzle Cleaning and Reassembly; Milker Nozzle Reinstallation

C LEANING THE MILKER NOZZLE
1 2
• Open the machine door and disconnect tubes (B) and (C) from
the milker (A).
• Remove the milker from the spouts support.
• Rotate and pull at the same time part (A).
• Rotate and pull at the same time part (B).
• Separate parts (C), (D) and (E).
C
L
E
A
N
E
R
3 4
• Wash all parts with the detergent solution taking care to mechani-
cally remove all visible residue and product layers, using a brush,
if necessary.
• Rinse and dry thoroughly all parts.
• Reassemble parts (C), (D) and (E).
• Replace part (B) and rotate to secure it.
• Replace part (A) and rotate to secure it.
5 6
• Replace milker nozzle (A) in the spouts support.
• Correctly reconnect tubes (B) and (C) to the milker nozzle.
• Close the machine door.
CAPPUCCINATORE
A
B
C
A
B
C
D
A T POWER - ON THE PROCEDURE FOR WASHING THE MILK CIRCUIT
IS PROPOSED
.
P
RESS THE CONFIRMATION BUTTON TO START THE PROCEDURE
OR ANY OTHER BUTTON TO SKIP THE OPERATION
.
T HE MILKER NOZZLE MUST BE DISASSEMBLED
REGULARLY FOR CLEANING
.
D O NOT USE DETERGENTS THAT ARE
TOO SCENTED
.
D
E
E
A
BC
A
BC