Page 5 of 16
Description
The Neets Sound Bar - SB1 is a stylish sound bar, designed to bring the presenter´s message to life.
It is designed to give a great sound quality no matter if it is used in a conference call or presenting in
a small- to medium-sized meeting room.
The Neets Sound Bar - SB1 is simple and advanced at the same time. It can simply be connected to
the display and use the wake-on-signal feature or it can integrate with a control system through the
RS-232 port.
Function description
• Control System compatibility
Compatible with all Neets Control Systems
• Can be mounted anywhere or sit on a shelf
Brackets for wall mounting included in the box
• System
2.0 stereo configuration, based on concept from stereo monitors: 2 set of 4” full-tone woofers
+ 1” tweeter
• Amplifier
Amplifier with built-in DSP functionality
• Power
4 x 20W stereo
• Power on
RS-232 or ”Wake-on-signal”
• Cabinet
All MDF construction is covered in black vinyl and the front grill is in fabric
• Power indicator
Power LEDs on the front integrated behind grill
Specications
Digital Input Optical TOSLINK female 1
Balanced stereo input 5-pin euro block terminal 1
Unbalanced stereo input RCA female 2
Auto Power On Via Auto ON/Off switch on rear Ye s
RS-232 Bidirectional, 3-pin euro block
terminal
1
Power input 24 VDC 1
VESA compatible 400 mm and 800 mm 2
Amplifier Built-in 4x20W 1
Volume Via connection of control system Ye s
Bluetooth No
Feedback Power On indicator on front,
integrated behind the grill
Ye s
To Next Page
Loading...