NEEWER Q4 - Page 6

06
Short press the mode button "MODE". When the
word "TTL" appears on the screen, the flash
has entered TTL mode.
※ TTL mode is only available when the
wireless function is enabled.
High Speed Sync (HSS)
Press the button " " briefly to display the " "
symbol on the screen. This feature requires the
use of a wireless transmitter for high-speed
synchronization, such as QProC/N/S.
The flash has three modes: TTL Auto Flash, M Manual Flash, and Multi Flash.
In TTL mode, the camera's metering system detects the flash lighting reflected
back from the subject and automatically adjusts the flash output so that the
subject and background are equally exposed.
※Press the < MODE > button. Three flash modes will appear on the LCD screen
in order.
Flash Mode - TTL Automatic Flash Mode Flash Mode - TTL Automatic Flash Mode
Power On/Off / Unlock Screen
TTL Mode
Rotate the adjustment knob to set the exposure
compensation value. Press the "SET" button to
confirm and exit the setting.
※Users can adjust the flash exposure
compensation in 1/3-stop increments between
±3 stops. "0.3" equates to 1/3 stop, "0.7"equates
to 2/3 stop. Set the flash exposure compensation
to "+0" to cancel the flash exposure compensation.
Flash Exposure Compensation(FEC)
① Short press the power button " ". The screen
will light up. Turn the adjustment knob
clockwise three times and then the screen
will be unlocked when the arrow pointing
downwards appears.
② Short press the power button " " to
turn off the light.
With High Speed Sync (FP Flash), users can use the flash synchronously
at all shutter speeds. High speed sync mode is particularly well adapted
when using aperture priority for fill flash on portraits.
EN