NEFF B57VS22G1 - Page 12

en Basic operation
12
7 Basic operation
7.1 Switching on the appliance
▶
Press ⁠ to switch the appliance on.
Notes
¡ In the basic settings, you can specify whether the
heating functions or the main menu should appear
when you switch on the appliance.
→"Basic settings", Page20
¡ If you do not perform any actions on the appliance
for an extended period, it will automatically switch it-
self off.
7.2 Switching off the appliance
▶
Press ⁠ to switch the appliance off.
Notes
¡ The residual heat indicator will appear on the dis-
play while the cooking compartment is still hot.
→"Residual heat indicator", Page12
¡ The cooling fan will continue to run until the cooking
compartment has cooled down.
→"Cooling fan", Page9
7.3 Residual heat indicator
After you have switched off the appliance, the residual
heat indicator will appear on the display.
Display Temperature
Residual heat high Over 120°C
Residual heat low Between 60 and 120°C
7.4 Setting the type of heating and
temperature
1.
Press ⁠ to switch the appliance on.
a The heating functions will then be displayed.
2.
Use the ⁠ or ⁠button to select the required heating
function.
3.
Use the ⁠button to navigate to the next row.
4.
Use the ⁠ or ⁠button to select the required temperat-
ure or setting.
5.
Press ⁠ to start.
a The cooking time will appear on the display.
a The heat-up indicator bar visualises the rising tem-
perature.
6.
When the food is ready, press ⁠ to switch the appli-
ance off.
7.5 Changing the temperature
You can also change the temperature once you have
started the appliance.
1.
Use the ⁠ or ⁠button to select the temperature
row.
2.
Use the ⁠ or ⁠button to select the required temperat-
ure.
a The temperature will now be changed.
7.6 Changing the type of heating
If you switch to a different heating function, the appli-
ance will reset all the settings.
1.
Press ⁠ to pause operation.
2.
Use the ⁠ or ⁠button to select the required heating
function.
3.
Use the ⁠button to navigate to the next row.
4.
Use the ⁠ or ⁠button to select the required temperat-
ure.
5.
Press ⁠ to start.
7.7 Pausing operation
1.
Press ⁠.
2.
Press ⁠ again to resume operation.
7.8 Cancelling operation
Note:Some functions, e.g. cleaning functions, cannot
be cancelled.
▶
Press and hold the ⁠button until the function that is
currently in progress is cancelled.
a Operation will stop and all the settings will be reset.
a The cooling fan will continue to run until the cooking
compartment has cooled down.
7.9 Viewing the current temperature
You can view the current temperature while the appli-
ance is heating up.
▶
Press ⁠.
a The temperature will be displayed for a few
seconds.
7.10 Displaying information
Requirement:The ⁠button must be lit.
▶
Press ⁠.
a The information will be displayed for a few seconds.