24
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock
The hob should be turned off.
To activate: press the symbol
‚ for 4 approximately seconds.
The
‚ indicator lights up for 10 seconds. The hob is locked.
To deactivate: press the symbol
‚ for approximately
4 seconds. The lock is now deactivated.
Childproof lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
All of the relevant information on the automatic childproof lock
connection can be found in the Basic settings chapter.
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Š.
Use limitations
This function is available on all hotplates, provided that no other
hotplate in the same group is operating, (see picture).
Otherwise, the display of the selected hotplate will flash
˜ and
Š; then it will automatically set the power level Š.
How to activate
1.Select a hotplate.
2.Press the ˜ symbol.
The
˜ indicator lights up.
The Powerboost function will have been activated.
To deactivate
1.Select a hotplate.
2.Press the ˜ symbol.
The
˜ indicator will no longer be displayed and the hotplate
will return to power level
Š.
The Powerboost function will have been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time programming function
This function may be used in two different ways:
■ to automatically switch off a hotplate.
■ as a timer.
Turning off a hotplate automatically
The zone turns off automatically once the selected time has
elapsed.
Programming the cooking time.
The hob must be switched on:
1.Select the hotplate and the desired power level.
2.Press the 3 symbol. The x indicator on the hotplate lights
up.
‹‹ is displayed on the time program function display.
3.Press the + or - symbol. The basic setting appears:
+ symbol: 30 minutes.
- symbol: 10 minutes.
To Next Page
Loading...
