NEFF U1524 - First-Time Appliance Use; Initial Cleaning, Burn-in, and Time Setting

10
Before using your appliance
for the first time
Preliminary Take the accessories out of the oven.
cleaning
Remove all packaging remnants, e.g. polystyrene
parts, from the oven.
1. Clean the appliance exterior with a soft
moistened cloth.
2. Remove the hook-in grilles and telescopic rails
from the oven.
3. Clean the oven and the accessories with a hot
detergent solution.
Initial burn-in
Before using the appliance for the first time, you
must set the current time on the electronic clock.
Heat the empty oven for approx. 30 minutes.
Select top and bottom heat at a setting of 240° C.
During the initial burn-in phase, please open the
kitchen windows to dissipate unpleasant odours.
Subsequent cleaning Clean the oven with a hot detergent solution.
Install the hook-in grilles and telescopic rails.
Time of day After connecting to the mains, or after a power
Setting the time
failure, the display 0:00 will blink.
Press the
>
button and set the current time with
the rotary knob (e.g. 15:00 hours).
To correct the time, press the > button until
the
#
symbol flashes.
Then set the time.
Note: The time cannot be corrected if an automatic
function or the timer has been set (to cancel see
”Electronic clock”).