41
Inset rack
Removing
1. Pull the inset rack out of its bearing bush.
2. Remove the inset rack.
Clean the rack using washing-up liquid and pan
scrapers or brushes.
Service and Repair Information
In the event of problems or repairs that you cannot
solve or perform yourself, our customer service will
be happy to help. Check the customer service
directory for a customer service facility in your area.
Caution: Calling the customer service because of an
operator error can be very costly!
E No and FD No You can find this information on the appliance’s
nameplate. The nameplate is located on the
appliance, behind the oven door, on the left bottom
edge of the oven.
In the event of a customer service request, please
have the following information handy:
E-Number FD
To Next Page
Loading...
