Appliance door en
19
3.
Close the appliance door fully . Grab hold of the
appliance door with both hands (on the left and
right) and pull it upwards and out .
4.
Carefully place the appliance door on a level sur-
face.
5.
Push on the left- and right-hand side of the door
cover from the outside until it is released.
6.
Remove the door cover .
7.
Lift out the inner pane and set it down carefully on a
flat surface.
8.
WARNING‒Risk of injury!
Scratched glass in the appliance door may develop
into a crack.
▶ Do not use any harsh or abrasive cleaners or
sharp metal scrapers to clean the glass on the
oven door, as they may scratch the surface.
Clean the removed door panes on both sides with
glass cleaner and a soft cloth.
9.
Clean the appliance door.
→"Suitable cleaning agents", Page13
10.
Dry the door panes and refit them.
→"Installing the door panes for the upper the appli-
ance door ", Page19
12.8 Installing the door panes for the upper
the appliance door
WARNING‒Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
▶ Keep your hands away from the hinges.
Components inside the appliance door may have sharp
edges.
▶ Wear protective gloves.
1.
Slide the inner pane in. In doing so, ensure that the
inner pane is in the retainer .
2.
Push the inner pane upwards until it is in the left-
and right-hand retainers .
3.
Put the door cover in position and push down on it
until you hear it click into place.
To Next Page
Loading...
Need help?
General