18Chapter 3 .
Network and Share
• View received files: You can view received files in following ways:
• Swipe down twice from the status bar to open the Notification Panel. Then tap the downloaded
notification to view file transfer progress.
• Go to Bluetooth settings and tap -> Show received files.
• On the Home screen, go to Downloads -> -> Recent.
Rename your phone
1. Go to Bluetooth settings and turn on the switch.
2. Tap -> Rename this device.
3. Edit the device name and tap RENAME to complete the configuration.
3. 5 Share your mobile data with other devices
You can share your phone’s mobile Internet with other devices (such as phones, tablets, or computers). The
following Internet sharing methods can be used:
Use Wi-Fi hotspot
Set up a portable WLAN hotspot to share your phone’s mobile Internet with other devices. Compared with
Bluetooth tethering, the portable WLAN hotspot feature offers quicker, longer range connections, but power
consumption is higher.
Note:
Your device can’t access the Internet using WLAN when your Portable WLAN hotspot is turned on.
• Open WLAN hotsopt
1. On the Home screen, go to Settings -> More -> Tethering & portable hotspot -> Wi-Fi hotspot.
2. Turn on the switch.
3. After enabling your personal WLAN hotspot, your phone will display and icon in the status bar.
• Set up WLAN hotspot
Tap Set up WLAN hotspot to configure following settings. After finishing, tap SAVE.
• Change the hotspot name: Enter the name of your hotspot and tap SAVE. The Network name is the
hotspot name. By default, this is the name of your phone model. You can manually change the name to
something that is easier to remember.
• Change the security setting: Tap Security to configure security setting. Your phone uses WPA2 PSK
encryption by default. Other devices will require a password to connect to the hotspot. If you choose
None, devices will not require a password to connect to the hotspot.
• Configure a password that is easy to remember: Tap Password and enter the new password (the
password must have at least 8 characters), then tap SAVE. Check Show password to view your password.
The hotspot password is generated randomly by your phone. For security reasons, choose a password
that is not easy to guess. You can check/uncheck Show password to display/hide your pass word.
• Select a AP band: Your device only supports 2.4 GHz Band.
• Configure the maximum number of connections: Touch Maximum connections to change the
maximum number of connections. Your phone will allow up to 8 users to connect to the hotspot.
• Set the time for keeping WLAN on during sleep
Tap Keep Wi-Fi hotspot on, you can choose Always, or Turn off when idle for 5/10/15 min.
• Manage users
On Wi-Fi hotspot screen, you can view the connected and blocked users. Tap BLOCK/UNBLOCK to stop/
allow the connection.
To Next Page
Loading...
