English Deutsch Français Español Italiano
日本語
10
MAINTAINING YOUR BIKE
Bikes need to be maintained on a regular basis in order to ensure that you can get the optimum performance out of your bike. You will need to start regular maintenance of your
NEILPRYDE bike after around 100 to 300 kilometers of use, which would probably be within 6 weeks of you first buying your bike. Typical early problems involved with ‘bedding-in’
your bike may include spokes losing their tension, gears slipping out of adjustment, stretching of cables and the bearings settling.
1. Cleaning and lubricating your NEILPRYDE bike
It is advised to make a habit of cleaning your NEILPRYDE bike after every ride. When doing so, we recommend you avoid the use of high pressure washers and chemical based
agents. If you must use a pressure washer, do not spray water directly onto the joints and bearings, as this could damage or alter them.
After cleaning, you should dry your bike straight away using a soft cloth, as this will help to prevent rust and corrosion of the metal components. As you are doing this, you can
also inspect the different parts of your bike and try to locate any possible problems or wear and tear that need attention.
Once your bike is dry, before storing it away in a dry, clean place, you should lubricate the chain, cogs and any other drive train parts. Be sure to use appropriate lubricating
oil that won’t damage your bike. Other checks that you can perform during this time include checking the brakes and seeing if the wheels are beginning to deform.
2. Wear and tear
Regularly check the individual components of your NEILPRYDE bike, particularly any parts that receive lots of wear and tear. If you are concerned about any part, then you
should check that component manufacturer’s manual, or else check with an expert. Never wait till the last minute, as prevention is usually easier than the cure.
3. Maximum weight for riders
Please note that NEILPRYDE bikes are only designed for carrying persons weighing up to a maximum of 110kg (242lbs). Anybody who exceeds this limit could be violating the
terms of the guarantee.
To Next Page
Loading...