5
④ Cigarette power cord with On/Off button(DC12V ~ 24V)
⑤ OTG Micro USB Cable
[ Installation ]
1. The Suction cups and bumper are assembled into bracket as like the following picture.
2. Stick the assembled bracket on the car front window as like the following picture.
3. Insert X-COP 8700 into bracket as like the following picture.
4. Adjust the X-COP 8700 to be horizontal by bending the bracket.
Insert the 12V/24V DC Cord into the Cigarette lighter cord in car and the jack into X-COP 8700.
To Next Page
Loading...
