Neoline X-COP 8700 - Page 7

7
2.2.2. During radar alert : silence zone addition/deletion
- When radar is alert, press UP or DOWN button for 1.5 sec then the area will be added
on silence zone.
- When car is within silence zone, press UP or DOWN button for 1.5 sec then the area
will be deleted from silence zone.
2.2.3. Operation at SET mode : SET value change
2.3. Right Button
2.3.1. Short Press
- Mode Change : Turbo, Highway, City, X-COP,
- City / X-COP / Highway Mode
Highway Mode : Full sensitivity, “Highway mode” will be announced.
Turbo Mode : Maximum sensitivity, “Tur bo mode” will be announced.
City Mode : Sensitivity 20dBm down, “City mode” will be announced.
X-COP Mode : Mode and GPS/Radar priority will be changed according to the car speed.
“X-COP mode” will be announced.
When speed is 0Km ~ 40Km
è City Mode & Radar voice and alert sound Off
When speed is 41Km ~ 70Km
è City Mode
è GPS alert priority is higher than Radar alert.
When speed is faster than 71Km
è Highway Mode
è Radar alert priority is higher than GPS alert