Neomatica ADM50 - Page 15

Neomatica. LLC. Tracker ADM50 GLONASS / GPS. Rev.1.2 dated 03.10.2018
16
Appendix A. Commands description
№
Command
Response
Parameters
Description
1
Name X
Example:
Name bus8
Device Name ‘X‘
Example: Device Name ‘bus8‘
X – terminal name
Set the name of the terminal. The name can contain
only letters of the Latin alphabet and numbers. The
name cannot exceed 10 characters in length. The
terminal name is added to the alarm SMS messages.
2
ADD ME X,Y
(only SMS)
Example:
ADD ME 1234
ADD ME 1234,2
PHONES (0)= (1)= (2)= (3)=
Example:
PHONES (0)= +79876543210
(1)= (2)= (3)=
PHONES (0)= (1)= (2)=
+79876543210 (3)=
X – password, the default is "0".
Y=0..3 – number of the memory
location to store the number.
Optional parameter.
Authorize the phone number from which the SMS was
received and write it to the memory cell Y. The
command is needed only to create a list of numbers
for controlling the terminal via SMS.
3
PHONES X
Example:
PHONES 1234
PHONES (0)= (1)= (2)= (3)=
Example:
PHONES (0)= (1)=
+79876543210 (2)= (3)=
X – password, the default is "0".
Request a list of authorized phone numbers.
4
STATUS
Example:
ID=1 Soft=0x09 GPS=9291
Time=11:21:39 25.02.10
Nav=0 Lat=57.2359
Lon=56.2593 Speed=0.0
SatCnt=5 Stat=0x0000
Command without parameters.
Current terminal condition.
ID – the number of the terminal (ID=1
always),
Soft – the software version,
GPS – the current number of the information
packet,
Time – current time and date according to
Greenwich Mean Time,
Nav – coordinates validity,
Lat – latitude,