Neomatica ADM50 - Page 16

Neomatica. LLC. Tracker ADM50 GLONASS / GPS. Rev.1.2 dated 03.10.2018
17
Lon – longitude,
Speed – speed,
SatCnt – number of satellites,
Stat – status.
5
PASS X,Y
X – the old password by default
X=0.
Y – new password.
Setting password.
6
IMEI
Example:
IMEI
IMEI
Example:
IMEI 359587013832624
Command without parameters.
Request IMEI of the GSM module installed in the
tracker. The command works 20 seconds after
power on.
7
PIN0
Example:
PIN0 1234
PIN0=X
Example:
PIN0=1234
X–PIN code
Setting PIN code for SIM card.
8
PIN1
Example:
PIN1=1234
PIN1=X
Example:
PIN1=1234
X–PIN code
Setting PIN code for SIM chip.
9
SETGPRS0
X,Y,Z
Example:
GPRS0: APN=X, user=Y,
pass=Z
Example:
X – access point,
by default X=internet.beeline.ru Y –
login, by default Y=beeline
Set GPRS parameters for SIM-card. The
command without parameters restores to the
current settings GPRS.
SETGPRS0
internet.beeline.ru
beeline,beeline
GPRS0: APN=
internet.beeline.ru,user=
beeline,pass= beeline
Z – password, by default
Z=beeline