Neomatica ADM50 - Page 17

Neomatica. LLC. Tracker ADM50 GLONASS / GPS. Rev.1.2 dated 03.10.2018
18
10
SETGPRS1
X,Y,Z
Example:
GPRS1: APN=X, user=Y,
pass=Z
Example:
X – access point by default
X=internet.beeline.ru Y – login by
default Y=beeline
Set GPRS parameters for SIM-chip. The
command without parameters restores to the
current settings GPRS.
SETGPRS1
internet.beeline.ru
beeline,beeline
GPRS1: APN=internet.mts.ru,
user=mts, pass=mts
Z – password by default
Z=beeline
11
SIMPRIORITY X
SIM PRIORITY X
X=0 – no priority
X=1 – main SIM card
X=2 – main SIM chip
by default X=0
Setting priority between SIM-card and SIM-chip.
12
SETHOST0 X,Y
Example:
SETHOST0
134,236,21,2,123
00
HOST0=X,Y
Example:
HOST0=134,236,21,2:12300
X – IP address, use
commas instead of dots.
Y – server port
Setting IP-address and server port, which the
terminal is connected to for data transmission. The
command without parameters restores to the
current server address and port.
13
DN0 X:Y
Example:
SETHOST0
www.test.ru:1000
HOST0=X:Y
Example:
HOST0= www.test.ru:1000
X – server domain name,
Y – server port
Setting domain name and server port, which the
terminal is connected to for data transmission. The
command without parameters restores to the current
server address and port.
14
DMODE X
Example:
DMODE 1
DMODE=X
Example:
DMODE=1
X=0 – Beacon mode
X=1 – Tracker mode
Selecting current mode of the tracker.