Neomatica ADM50 - Page 18

Neomatica. LLC. Tracker ADM50 GLONASS / GPS. Rev.1.2 dated 03.10.2018
19
15
BMODE X,Y,Z
Example:
BMODE 1,0,1
BMODE=X, Y, Z
Example:
BMODE=1, 0, 1
X – GSM module status during
sleep, X=0 – off, X=1 – on.
Y – GLONASS/GPS module
status during sleep, Y=0
– off, Y=1 – on.
Z – determination of coordinates
during activity, Z=0 – no; Z=1
– GLONASS/GPS; Z=2 – LBS; Z=3
– Auto.
Setting the GSM and GLONASS/GPS
modules disabling in Beacon mode.
16
BTIME X,Y,Z,A
Example:
BTIME=X,Y,Z,A
Example:
X – minimum activity
time in seconds.
Setting the duration of activity and sleep states in
Beacon mode.
BTIME
30,180,600,300
BTIME=30,180,600,300
Y – maximum activity
time in seconds.
Z – sleep time after successful
activity.
A – sleep time after error in
seconds.
17
BWAKEUP
BWAKEUP OK
Extraordinary awakening the tracker in the Beacon
mode.
18
WHERE
Request for a link to «Yandex.Maps» with the last
valid coordinates. Answer is in text SMS-message.
19
PERIOD X,Y
Example: PERIOD
60,300
PERIOD min=X max=Y
Example: PERIOD
min=60 max=300
X – recording period during
movement in seconds
Y – recording period in modes
"Statics" in seconds.
Setting the recording period in the memory of
information packets during the movement and in
the "Statics" modes.