Need help?Do you have a question about the Neostar Electronics GSCD1 and is the answer not in the manual?
CD Player Section| frequency response | 60 to 5KHz +/-3dB |
|---|---|
| signal-to-noise ratio | 45dB |
CD Burner Section| frequency response | 80 to 5KHz |
|---|---|
| signal-to-noise ratio | 40dB |
Cassette Section| tape speed | 3000Hz +3/-2% |
|---|---|
| playback frequency | 8000Hz +/-4dB |
| wow & flutter | 0.1% (WRMS) |
| frequency response | 125 to 1000Hz +/-4dB |
| signal-to-noise ratio | 35dB |
Record Player Section| speed | 33/45/78 RPM |
|---|---|
| wow & flutter | Less than 0.35% |
| signal-to-noise ratio | 28dB |
| cartridge type | Ceramic cartridge |
| stylus type | Sapphire stylus (Japanese made) |
Radio Section| frequency range (AM) | 522-1620 kHz |
|---|---|
| frequency range (FM) | 87.5-108 MHz |
Amplifier Section| frequency response | 60 to 16KHz |
|---|---|
| signal-to-noise ratio | 40dB |
| output power | 10% THD 2 x 4W RMS |
General Specifications| power requirement | AC 230V ~ 50Hz |
|---|---|
| power consumption | 48W |
| dimensions (main unit) | 428 (W) x 370 (D) x 168 (H) mm - Approx. |
| dimensions (speaker) | 146 (W) x 142 (D) x 240 (H) mm - Approx. |
| weight | 7.3kgs - Approx |
Manual tuning, FM/FM-stereo reception, and tips for improving signal reception.
Getting started, playback controls (play/pause, stop, skip), and disc handling.
How to record onto CD-R/RW from Phono, Tape, or Aux sources.
Steps to record vinyl records onto a CD using the Phono function and record buttons.
Recording from cassette tapes and external audio devices via Aux-in to CD.
Removing stylus protector, setting speed, placing records, and starting playback.
Installing Audacity, configuring settings, and recording audio to a computer via USB.
To Next Page