Apex Classic Setup and Programming Guide v2.2 Page 112
If Power, 95
If Sun, 96
If Switch, 96
If Temp, 97
If Time, 97
Initialize Memory, 80
Internet. See Setup:Network Setup
Configuring the Apex to be
accessible from the Internet, 20
Light
Wizard, 46
Lock the Display, 68
Log Interval, 79
Login
Credentials, 14
Maintainence
Conductivity Probe, 42
Disolved Oxygen Probe, 45
ORP Probe, 39
Ph Probe, 35
Temperature Probe, 32
Manual Control, 74
Memory, Initialize, 80
Menu Tree, 89
Min Time, 98
Modules
Configure, 26
Delete, 25
Legacy Setup, 26
Rename, 25
Moon, 93
Order of Operation. See Programming:
Order of Operation
ORP
Calibration, 36
Probe Maintainence, 39
Probe Setup, 35
Programming Reference, 93
Programming Wizard, 48
OSC, 98
Oscillate, 98
Outlet, 94
pH
Calibration, 33
Probe Maintainence, 35
Probe Setup, 32
Programming Reference, 94
Programming Wizard, 48
PM2, 39
Calibration, 41
PM3, 42
Calibration, 44
Port
Web Interface, 14
Power, 95
Power Fail Log, 80
Probe Expansion 1000. See PX-1000
Probe Module 1, 23
Probe Module 2, 25
Probe Module 3, 25
Profiles, 64, 65, 66
Programming
Advanced, 49
Alarms and Warnings, 55
Command Referance, 91
Default Program, 46, 99
Editing Outlet, 49
Feed Timers, 62, 92
Hysteresis, 54
Order of Operation, 52
Outlets, 46
Profiles, 64, 65, 66
Seasonal, 60
Triggering on power events, 56
Variable Speed Ports, 63
Virtual Outlets, 51
Wizard, 46
To Next Page
Loading...
Need help?
General