Apex Classic Setup and Programming Guide v2.2 Page 78
Figure 10 - Web Interface Graph
NOTE: Since the graphs are generated from the Data Logs, graphs in the
past may display more or fewer probes based on the Apex system
configuration on the day of the graph.
FEED TIMER OPERATION
The AquaController Apex has 4 user defined feed timers. See the section titled
Programming Feed Timers in the Programming Outlets section for information on
how to program feed timers.
To activate Feed Timers
Apex Display: Control/Status – Feed – or from the Home screen, simply
press the down arrow. Quickly press the up/down arrow repeatedly to cycle
through feed timer A, B, C and D, stop pressing the up/down arrow when
the display indicates the Feed Timer desired. A second later, the Feed
Timer will start and the display will count down the feed timer. The Exit
button can be pressed to continue the feed timer in the background and
resume the display to normal operation.
Web Interface: Status – near the bottom of all the status pages, select
the Feed Timer to be activated from the Feed drop down box, click the Feed
button. The Feed Timer will be executed in the background, the Apex
Display nor the Web Interface will provide a count down timer.
To Next Page
Loading...
Need help?
General