Neptune E4000 User Manual

DELIVER
Y
VOL REPORTS
QSG-303-3
Rev. B 1/05
Operators Guide for LPG, with security valve
(“NON-PRESET” BATCH mode).
How to make a delivery
1. Insert ticket in the printer
2. From the “
NEPTUNE” root menu, press either of the white buttons or on the
four button front control panel, until “
ROUTE” is flashing. Then press the green
START/ENTER button.
3. Press or until “DELIVERY” is flashing, then press the START/ENTER button.
4. Press or until the product that you intend to deliver is displaying in the “SELECT
PRODUCT
” menu, then press the START/ENTER button to confirm the correct product.
For a priced product the display will show the gross price, confirm this is the correct
price by pressing the
START/ENTER button, or press STOP/CANCEL to return to the
“
SELECT PRODUCT” menu.
5. The display will reset and after 10 seconds the register will open the security valve.
6. You can now open the manual valve to begin delivering product.
7. When the delivery is complete close the manual valve.
8. Press the
STOP/CANCEL button to close the security valve.
Note
: pressing the START/ENTER button again will re-open the security valve to
continue the delivery.
NEPTUNE
ROUTE SUPERVISOR W&M
GROSS PRICE $/VOL
__
$
/ GAL
SELECT PRODUCT
FUEL #1
NET/TOT $/VOL
NET 60 F 0.0 GAL

Neptune E4000 Specifications

General

Accuracy	±1% of full scale
Power Supply	24 VDC
Outputs	4-20 mA
Communication Protocols	Modbus RTU
Process Temperature	-40 to 356°F (-40 to 180°C)
Operating Temperature	-40 to 158°F (-40 to 70°C)
Storage Temperature	-40 to 176°F (-40 to 80°C)

Summary

How to make a delivery

Initiate Delivery Process

Insert ticket, navigate menus, select product, and confirm price for delivery.

Execute and Complete Delivery

Open security and manual valves, deliver product, close valves, and confirm delivery completion.

Print Delivery Ticket

Print Ticket and Finalize

Insert ticket, close security valve, print delivery ticket, and return to the main menu.

Print Shift Report

Generate Shift Report

Navigate menus to select and print the end-of-shift report.